elsner elektronik 71280, Установка и настройка

Страница: 13 / 48

11 Views and device operation
Nunio KNX M-T push button • Status: 25.02.2021 • Technical changes reserved. Errors reserved.
5.3. Area function
If the area function in ETS has been activated, another function is available alongside
the regular key functions. This is triggered by touching or wiping over an area, e.g. if
you touch the sensor with the palm of your hand.
Using the area function
The display area of the sensor is divided into four virtual areas, which correspond to
the buttons for the setting “4 buttons”. The virtual areas are independent of the but-
tons shown. They remain the same, irrespective of whether one, two, three or four but-
tons are displayed.
If one of the four areas is touched and another (different) virtual real is touched within
0.2 seconds a key is pressed and another (different) key is touched within one second,
the action set in the ETS is performed for the area operation (See a) and b)). The touch
function is then blocked for 0.5 seconds.
Using the normal key function
If one of the key areas displayed is pressed and no other virtual area is touched within
0.2 seconds, the normal key function is enabled for 5 seconds (See c) and d)). This that
if the 0.2 seconds have passed, different buttons or even the same button can be
pressed multiple times and the normal button function is executed. With each new
touch of a button, the readiness for the normal button function is extended by 5 sec-
onds.