elsner elektronik 71280, Установка и настройка

Страница: 44 / 48

42 Setting the parameters
Nunio KNX M-T push button • Version: 25.02.2021 • Technical changes and errors excepted.
Each logic output may transmit one 1-bit or two 8-bit objects. Determine what the out
put should send if logic = 1 and = 0.
If the output type is a 1-bit object , set the output values for the various conditions.
If the output type is two 8-bit objects , set the type of object and the output values
for the various conditions.
1. / 2. / 3. / 4. Input • Do not use
- Logic inputs 1...8
- Logic inputs 1...8 inverted
• Temperature sensor malfunction ON
• Temperature sensor malfunction OFF
Output type • a 1-bit-object
• sends two 8-bit objects
Output value
if logic = 1 1 • 0
Output value
if logic = 0 1 • 0
Output value
If block active 1 • 0
Output value if
monitoring time exceeded 1 • 0
Object type • value (0…255)
• Percent (0…100%)
• Angle (0…360°)
• Scene call-up (0…63)
Output value object A
if logic = 1 0 … 255 / 100% / 360° / 63; 1
Output value object B
if logic = 1 0 … 255 / 100% / 360° / 63; 1
Output value object A
if logic = 0 0 … 255 / 100% / 360° / 63; 0
Output value object B
if logic = 0 0 … 255 / 100% / 360° / 63; 0
Output value object A
If block active 0 … 255 / 100% / 360° / 63; 0
Output value object B
If block active 0 … 255 / 100% / 360° / 63; 0
Output value object A if
monitoring time exceeded 0 … 255 / 100% / 360° / 63; 0
Output value object B if
monitoring time exceeded 0 … 255 / 100% / 360° / 63; 0