elsner elektronik 70151, Установка и настройка

Страница: 18 / 30

16 Settings on the device
Ultrasonic Probe KNX SO250 • Version: 14.09.2020 • Technical changes and errors excepted.
4.4. Relay set-up
Standard screen:
Press key once to enter the “Settings“ menu.
4.4.1. Set relay 1 / 2
The setting options are the same for both relays. Confirm your selection with the key
.
Tank fill level:
KNX SO250 Tank Sensor
Distance: 59.4cm
Settings >
KNX SO250 Tank Sensor
Tank content:
4885 Litre
Settings >
or
Distance measurem.>™
Fill level meas.
>
Relay set-up >
Acoustic alarm >
Move the cursor (flashing rectangular at the right
side) to the menu item “Relay set-up” using the
keys
or and press key .
R 1 settings >™
R 2 settings >
R 1 fault warning >
R 2 fault warning >
If you want to use the relay for automatic filling/
emptying or for overflow/empty warning, use the
keys
or to move the cursor to the "R 1 set -
tings" or "R 2 settings" menu item.
Tank fill level >™
Tank drainage >
Overfill warning >
Empty warning >
Use the buttons or to move the cursor to the
desired setting. Confirm your selection with the
key .
Start tank filling
with R 1 when
a minimum level of
15% is reached.
use the keys and to set the minimum level
(in %) at which the filling of the tank is started.
Confirm with the key .
Stop tank filling
with R 1 when
a maximum level of
90% is reached.
Use the keys and to set the maximum level
(in %) at which the filling of the tank is stopped.
Confirm your setting with the key . You will au
-
tomatically return to the initial position.