elsner elektronik 70151, Установка и настройка

Страница: 27 / 30

25 Parameter setting
Ultrasonic Probe KNX SO250 • Version: 14.09.2020 • Technical changes and errors excepted.
7.3. Threshold Values
7.3.1. Threshold Value 1 / 2 / 3 / 4 / 5
Threshold value:
For selection of „Threshold value setpoint per parameter“:
For selection of „Threshold value setpoint per communication object“:
Use threshold value 1 Yes • No
Use threshold value 2 Yes • No
Use threshold value 3 Yes • No
Use threshold value 4 Yes • No
Use threshold value 5 Yes • No
Unit
Note: for distance measurements only "cm"
allowed! Litre • cubic metres • % • cm
Threshold value setpoint per Parameter • Communication object
Threshold value in Litre
Threshold value in m³
Threshold value in %
Threshold value in cm 1 … 10.000.000
1 … 10.000.000
0 … 100
1 … 254
Hysteresis of the threshold value in % 0 … 50
The value communicated last shall be
maintained • not
• after restoration of voltage
• after restoration of voltage and program-
ming
Start threshold value in Litre
Start threshold value in m³
Start threshold value in %
Start threshold value in cm
valid until 1st communication
(not for output after … programming) 1 … 10.000.000
1 … 10.000.000
0 … 100
1 … 254
Type of threshold change • Absolute value with a 16 bit comm. object
(l)
• Absolute value with a 32 bit comm. object
(m3 and cm)
• Absolute value with a 8 bit comm. object
(%)
• Increase/decrease with one comm. object
• Increase/decrease with two comm.
objects