elsner elektronik 70151, Установка и настройка

Страница: 14 / 30

12 Settings on the device
Ultrasonic Probe KNX SO250 • Version: 14.09.2020 • Technical changes and errors excepted.
Standard screen:
Press key once to enter the "Settings" menu.
Setting options: From 1 s to 9 s in increments of one second from 10 s to 50 s in incre -
ments of ten seconds, from 1 min to 120 min in increments of 10 minutes.
Confirm your selection by pressing the key
. You will automatically return to the
standard screen.
4.3. Fill level measurement
The
KNX SO250
Tank Sensor can measure the fill level of liquids in tanks. Possible
tank designs are rectangular tanks, spherical tanks, vertical or horizontal tanks. If more
than one similar tank exist in a battery only one tank needs to be described for the
KNX
SO250
to calculate the content according to the specified tank number. The following
settings are made in the „Fill level measurement“ menu:
• Tank design
• Tank volume/capacity/fill height
• Probe distance to liquid for full tank
• Number of tanks in a battery
• Unit of the fill level display
• Time interval for measurements
KNX SO250 Tank Sensor
Distance: 59.4cm
Settings >
KNX SO250 Tank Sensor
Tank content:
4885 Litre
Settings >
or
Distance measurem.>™
Fill level meas.
>
Relay set-up >
Acoustic alarm >
Move the cursor (flashing rectangle on the right)
using the keys
and to the menu item “Dis -
tance measurement“ and press key .
Display in mm >™
Display in cm >
Display in m >
Move the cursor using the keys or to the re -
quired setting. You can display the distance in mil -
limetres (mm), centimetres (cm) or meters (m).
Confirm your selection by pressing the key .
Measurement
frequency?
Once every 8 sec.™
Use the keys and to set the required time in -
terval for the measurements.