Eloma GENIUS MT, Перевод оригинальной инструкции по эксплуатации

Страница: 29 / 172

Functional parts and operation
29
4.3 LOADING AND EMPTYING THE DEVICE
NOTICE!
 Before starting work, it is imperative that you familiarise yourself with the
section "Safety" and the special notes and warnings see section 2.2.2.

Only use the stipulated container sizes.

Make sure that the racks latch securely or the loading trolleys/tray
trolleys/mobile plate racks are securely positioned, and the containers are
firmly in place.

Always position containers in a horizontal position (supported at the same
height on the left and right).
 Adhere to the maximum load.

We recommended that you do not place a container with liquids or cooked
products which liquefy during the cooking process in the combi steamer at a
height of above 1.60 m, measured from the access level.

Always remove the containers in a horizontal position and, wherever
possible, only move them with a cover attached.
Pos : 59 / 953-El oma/BET/ 4_F unkti ons teil e und Betrieb/G eniusMT /Tisc hgeräte_MM_GMT @ 18\ mod_1524225974776_6. doc @ 207336 @ 3444 @ 1
4.3.1 TABLE-TOP DEVICES
Without tray trolley/mobile plate rack
Open the cooking chamber door. 1.
2.
Insert the containers at the desired insert level.
Wherever possible, start at the bottom. –
3. Close the cooking chamber door and start the cooking process.
4. Open the cooking chamber door.
5. Remove the containers.
With tray trolley/mobile plate rack

INFORMATION:
Without racks only.
Check that the containers are properly in place in the loading trolley.
Only use suitable containers which are also firmly in place.