Elnec SEEprog, Руководство пользователя

Страница: 44 / 171

ELNEC s. r. o.
•
interprete the VME files compressed binary variation of SVF files
•
security
•
insertion test, reverse insertion check
•
contact check
•
ID byte check
•
special
•
production mode (automatic start immediately after device insertion)
•
lot of serialization modes (more type of incremental modes, from-file mode, custom
generator mode)
•
statistic
•
count-down mode
Buffer operations
•
view/edit, find/replace
•
fill/copy, move, byte swap, word/dword split
•
checksum (byte, word)
•
print
File load/save
•
no download time because programmer is PC controlled
•
automatic file type identification
Supported file formats
•
unformatted (raw) binary
•
HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX,,
ASCII HEX
•
Altera POF, JEDEC (ver. 3.0.A), e.g. from ABEL, CUPL, PALASM, TANGO PLD, OrCAD
PLD, PLD Designer ISDATA, etc.
•
JAM (JEDEC STAPL Format), JBC (Jam STAPL Byte Code), STAPL (STAPL File) JEDEC
standard JESD-71
•
VME (ispVME file VME2.0/VME3.0)
•
SVF (Serial Vector Format revision E)
•
STP (Actel STAPL file)
GENERAL
•
operating voltage 110-250V AC
•
power consumption max. 20W active, about 2W sleep
•
dimensions 195x140x55 mm (7.7x5.5x2.2 inch)
•
weight 0.9kg (1.98 lb)
•
operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)
•
operating humidity 20%..80%, non condensing
44