Elnec SEEprog, Руководство пользователя

Страница: 17 / 171

BeeHive204
Introduction
BeeHive204 is very fast universal 4x 48-pindrive concurrent multiprogramming system
designed for high volume production programming with minimal operator effort. The chips are
programmed at near theoretical maximum programming speed.
BeeHive204
consist of four independent isolated universal programming modules, based on
the BeeProg2 / programmer hardware. Therefore the sockets can run
asynchronously (concurrent programming mode). Each programming module starts
programming at the moment the chip is detected to be inserted in the socket properly -
independently on the status of other programming modules. It result three programming
modules works while you replace the programmed chip at the fourth.
Modular construction of hardware - the programming modules works independently - allows
for continuing operation when a part of the circuit becomes inoperable. It also makes service
quick and easy.
Hands-free operation: asynchronous and concurrent operation allows a chip to begin
programming immediately upon insertion of a chip. The operator merely removes the finished
chip and inserts a new chip. Operator training is therefore minimized...
BeeHive204 support all kinds of types and silicon technologies of today and tomorrow
programmable devices without family-specific module. You can be sure the next devices
support require the software update and (if necessary) simple package converter
(programming adapter), therefore the ownership cost are minimized.
Using built-in in-circuit serial programming ( ISP ) connector, the programmer is able to
program ISP capable chips in circuit.
BeeHive204
provide very competitive price coupled with excellent hardware design for
reliable programming. It has probably best "value for money" programmer in this class.
BeeHive204 provide very fast programming due to high-speed FPGA driven hardware and
execution of time-critical routines inside of the programmer. It is at least so fast than
competitors in this category, for many chips much faster than most competitors. As a result,
when used in production this programmer waits for an operator, and not the other way round.
BeeHive204 interfaces with the IBM PC/compatible, portable or desktop personal computers
through USB (2.0) port.
BeeHive204 provides a banana jack for ESD wrist straps connection to easy-to-implement
the ESD protection control and also other banana jack for earth wire.
FPGA based totally reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down
and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-
speed circuitry to deliver signals without overshoot or ground bounce for all supported
devices. Pin drivers operate down to 1.8V so you'll be ready to program the full range of
today's advanced low-voltage devices.
17