Elnec SEEprog, Руководство пользователя

Страница: 133 / 171

PG4UW
•
option Use Log file text truncating when file size limit is reached - when checked, the
Log file size limit is on. It means, that when Log file size reaches specified value, the part
of text included in Log file will be truncated. When the option is unchecked, the size of Log
file is unlimited, respectively is limited by free disk space only.
•
option Maximum Log file size specifies the maximum size of Log file in kB.
•
option Amount of truncated text specifies the percentage of Log file text, which will be
truncated after Maximum Log file size is reached. The higher value means more text will
be truncated (removed) from Log file.
The Log file settings can be saved to disk by command
Options / Save options .
Job Report
Job Report represents the summary description of operation recently made on device. Job is
associated with project file and it means the operation starting with Load project until loading
of new project or closing program PG4UW.
Job Report contains following information:
•
project name
•
project date
•
Protected mode status
•
PG4UW software version
•
programmer type and serial number
•
start time of executing the Job (it means time when Load project operation was
performed)
•
end time of executing the Job (time of creating the Job Report)
•
device name
•
device type
•
checksum
•
device operation options
•
serialization information
•
statistics information
Job Report is generated in following cases:
•
user command Load project is selected
•
closing or disconnecting programmer sites is selected
•
closing the PG4UW
•
device Count down counter reaches 0 (finished status)
•
manually by user, when menu "File | Job Report" is used
The Job Report is generated for recently loaded project file, only when statistics value of
Total is greater than 0.
It means, at least one device operation (program, verify,...) must be performed.
Following options are available for Job Report:
Checkbox
Enable Job Report function - when checked, the Job Report function is active
(enabled). Otherwise the Job Report function is disabled.
Checkbox
Automatically save Job Report file - when checked, the Job Report will be saved
automatically to directory specified in edit field Job Report directory and with file name
created as following:
133