Elnec SEEprog, Руководство пользователя

Страница: 138 / 171

ELNEC s. r. o.
Protected mode in PG4UWMC
Program PG4UWMC has Protected mode very similar to program PG4UW. The difference is,
that Protected mode can be activated by menu command but cannot be activated by Project
file. Another difference is, that Protected mode settings of PG4UWMC are saved to
configuration .ini file of PG4UWMC while program PG4UWMC is closed. During next start of
application PG4UWMC the recent Protected mode settings obtained from .ini file are used.
There is one menu command -
Options / Protected mode - that allows to use Protected
mode in application PG4UWMC. After selecting the menu Options / Protected mode,
password dialog appears. User has to enter password twice to confirm the password is
correct. After successful password confirmation program switches to Protected mode.
Protected mode settings are saved to configuration .ini file of PG4UWMC. During next start of
program PG4UWMC the Protected mode settings from .ini file are used.
Checkbox
Keep "Load project" operation allowed is set to inactive state by default - it
means the Load project operation button and menu will be disabled when Protected mode is
active.
If the option is enabled (checked), the Load project operation button and menu will be allowed
in Protected mode.
To switch program from Protected mode back to Normal mode, use the menu command
Options / Normal mode . The " Password required " dialog appears. User has to enter the
same password as the password entered during switch to Protected mode.
When Protected mode is active, the label "Protected mode" is visible near the top of Log
window of PG4UWMC main window.
Note: Sometimes when Protected mode is switched from active state to inactive state
(Normal mode), some commands (for example command "Load project") may remain
disabled. This can be resolved by clicking on button
Stop ALL .
Multi-projects
Multi-project is special feature which provides possibility to run any sequence of operations
with any device , based on informations saved during creation of sub-projects and multi-
project itself.
In practice, using Multi-projects you are able to:
•
comfortably program multi-chip devices
•
configure and run any sequence of device operations (e.g. P
Verify) with one device
See also more detailed description on operation modes.
Basic terms related to Multi-project:
•
Multi-project file is special file that contains all Multi-project information. Multi-project
file can include one or more projects. Projects included in Multi-project (file) are also
called sub-projects.
138