PG4UW software
73
Selecting option "Allow address history logging" activates saving of recently confirmed values.
These are saved for each device separately, count is limited to last 15 items.
Note: Address history values are common for all buffer data manipulation dialogs.
Default address range is set according to buffer range of selected device.
Selecting option "Maintain last inserted values" causes that for the next time you open this
dialog, previously confirmed values will be reloaded as default.
Buffer / Swap block
This command swaps a high- and low- order of byte pairs, foursomes or nibbles inside bytes
depending on swap mode selected by user. Swap operation is performed on buffer block
specified by Start and End addresses. This block must start on even address and must have
an even number of bytes. If the conditions do not fulfill, the program modifies addresses itself
(start address is moved on lower even address and/or end address is moved on higher odd
address).
Following swap modes are available, user can select from:
1. Swap 2-bytes inside 16-bit words swap of byte pairs inside 16-bit words.
2. Swap 4-bytes inside 32-bit words swap of byte foursomes inside 32-bit words.
3. Swap nibbles inside bytes
swap of high- and low- nibbles inside each byte.
4. Mirror bits inside bytes
mirror bits inside each byte
Examples of swap operation in buffer:
Swap bytes operation from Start address 0 to End address N modifies data in buffer by
following tables:
Address
Original
Data
Swap 2-bytes
inside 16-bit
words
Swap 4-bytes
inside 32-bit
words
Swap
nibbles
inside bytes
Mirror bits
inside
bytes
0000h
b0
b1
b3
b0n
b0m
0001h
b1
b0
b2
b1n
b1m
0002h
b2
b3
b1
b2n
b2m
0003h
b3
b2
b0
b3n
b3m
0004h
b4
b5
b7
b4n
b4m
0005h
b5
b4
b6
b5n
b5m
0006h
b6
b7
b5
b6n
b6m
0007h
b7
b6
b4
b7n
b7m
b0, b1, b2 ... means original buffer byte values from addresses 0, 1, 2...
b0n, b1n, b2n... means nibble-swapped original bytes b0, b1, b2... by following rules:
Original Byte bits
bit
7 bit
6 bit
5 bit
4 bit
3 bit
2 bit
1 bit
0
Nibble-swapped
Byte
Bits bit
3 bit
2 bit
1 bit
0 bit
7 bit
6 bit
5 bit
4
Original Byte bits
bit
7 bit
6 bit
5 bit
4 bit
3 bit
2 bit
1 bit
0
Mirrored Byte Bits
bit
0 bit
1 bit
2 bit
3 bit
4 bit
5 bit
6 bit
7
Содержание BeeHive304
