Elnec BeeHive304, Руководство пользователя

Страница: 32 / 152

Elnec s. r. o.
32
The programmer is driven by a comfortable and easy-to-use control program with pull-down
menu, hot keys and on-line help. The software runs on all versions of MS Windows from
Windows XP to Windows 8 (32bit and 64-bit).
Selecting of device is performed by its class, by manufacturer or simply by typing a fragment
of vendor name and/or part number.
Standard device-related commands (read, blank check,
program, verify, erase) are boosted by some test functions (insertion test, signature-byte
check), and some special functions (autoincrement, production mode - start of programming
immediately after insertion of chip into socket).
All known data formats are supported. Automatic file format detection and conversion during
loading of file is provided.
The rich-featured serialization function enables one to assign individual serial numbers to
each programmed device - simply increments a serial number, or the function enables one to
read serial numbers or any programmed device identification signatures from a file.
The software also provides - in the Device information section - lots of information about the
programmed device. In addition, the
drawings of all available packages are provided. The
software also provides explanation of chip marking (the meaning of prefixes and suffixes at
the chips) for each supported chip.
Jam files of JEDEC standard JESD-71 are interpreted by Jam Player . Jam files are
generated by design software which is provided by the manufacturer of respective
programmable device. Chips are programmed through JTAG (IEEE 1149.1 Joint Test Action
Group) interface.
VME files are interpreted by VME Player. VME file is a compressed binary variation of SVF
file and contains high-level IEEE 1149.1 bus operations. SVF files are interpreted by SVF
Player. SVF file (Serial Vector Format) contains high-level IEEE 1149.1 bus operations. SVF
files are generated by design software which is provided by manufacturer of respective
programmable device. Chips are programmed through JTAG interface. VME files are
generated by design software which is provided by manufacturer of respective programmable
device.
By attaching more BeeProg3 programmers to the same PC (through USB port) one can
create a
powerful multiprogramming system , which supports as many chips, as the
BeeProg3 programmer and without obvious decrease of programming speed. It is important
to know, that there is concurrent multiprogramming - each programmer works independently
and each programmer can program a different chip, if necessary.
Advanced design of the BeeProg3 universal programmer, including protective circuits,
original brand components, careful manufacturing and burning-in allow us to provide a three-
year warranty on parts and workmanship of the programmer.
Elnec provides free shipping of programmer repaired under warranty back to customers
worldwide. The warranty is valid from the date of purchase.
Registration of the product will speed up every repair request. Registration should be
performed within 60 days from the date of purchase