Elnec BeeHive304, Руководство пользователя

Страница: 147 / 152

Common notes
147
4. Program device (/Program[:switch])
5.
Close of control program (/Close only together with parameter /Program)
Available command line parameters for starting program PG4UW in demo mode
Demo mode is useful in situations, when no programmer device is available. Demo mode can
be used by clicking button Demo in dialog Find programmer or by command line parameter
/demo. Recommended usage of the parameter is:
pg4uw.exe /demo /<programmer name>
where <programmer name> has to be replaced by name of wished programmer as it is used
in PG4UW control program.
Hardware
If you find none solution, please document the situation, i.e., provide us an accurate
description of your PC configuration, including some other circumstances bearing on the
problem in question, and advise the manufacturer of your problem. Don’t forget please enter
of PC type, manufacturer, speed, operation system, resident programs; your parallel port I/O
manufacturer and type. Use please
Device problem report form for this purpose.
Warning:
Class A ITE notice
Devices described at this manual are class A products. In domestic
environment this products may cause radio interference in which case the
user may be required to take adequate measures.
Because BeeProg3 has internal power supply, follow these special precautions:
Circuit breakers (overcurrent protection) must be a part of building electrical installation.
Pull out power cord plug from outlet to disconnect programmer from mains. The outlet
must be placed near to programmer and must be easy accessible.
Other
Please don't move Info application window while BUSY LED is on - supervisor circuit can be
active and switch the programmer into safe mode as in case of communication PC-
programmer error.