Elnec BeeHive304, Руководство пользователя

Страница: 119 / 152

PG4UW software
119
When Protected mode is active, the label "Protected mode" is visible near the top of Log
window of PG4UWMC main window.
Note: Sometimes when Protected mode is switched from active state to inactive state
(Normal mode), some commands (for example command "Load project") may remain
disabled. This can be resolved by clicking on button Stop ALL.
Multi-projects
Multi-project is special feature which provides possibility to run any sequence of operations
with any device , based on informations saved during creation of sub-projects and multi-
project itself.
In practice, using Multi-projects you are able to:
comfortably program multi-chip devices
configure and run any sequence of device operations (e.g. P
Verify) with one device
See also more detailed description on operation modes.
Basic terms related to Multi-project:
Multi-project file is special file that contains all Multi-project information. Multi-project
file can include one or more projects. Projects included in Multi-project (file) are also
called sub-projects.
Sub-project means classic project file which has been included into Multi-project file
during Multi-project file build.
Project file - a special type of file that combines buffer data, device operation options,
special options and some level of safety features. It completely defines the way how to
treat with the device. Once saved, it can be reloaded anytime and the operation can be
repeated exactly.
Multi-chip device is device with two or more independent chips (of the same or various
types) in single package.
Sub-device - an individual part of multichip device. Sub-device is selectable from
PG4UW device list. Once selected, you can work with respective chip in fully manner.
You can define, test and save the project file for the partial chip.
Master device - a multichip device unit, consists of sub-devices. Master-device is
selectable from PG4UW device list, too. Once selected, you can use Multi-project
Wizard to build-up the Multi-project file from individual project files and
save/load/execute it. Master device is not defined if the Multi-project is built up from
Single-chip devices.
Device operation - each operation executable directly selecting via menu, clicking on
toolbar button or callable via remote command (Blank, Read, Verify, Program, Erase).
Some of these operations (especially Program and Erase) may contain embedded sub-
operations, editable via Menu/Device/Device options.
Multi-project Wizard - an assistant for Multi-project file building. The Wizard allows
user to select projects that have to be included in Multi-project and save them to one
Multi-project file. Process of saving selected project files to one Multi-project file is
called Multi-project file building. The Wizard also allows to start device operation
according to projects (sub-devices) included in Multi-project. More information about
Multi-project Wizard is described below.