33
Replacing the Needle Bar, Needle Spring and Cushion
1. Remove the presser foot (see pages 20 and 21).
2. Loosen the needle bar holder screw.
3. Pull the needle bar up and out of the frame.
To remove the parts on the needle bar, pull the needle
bar as far as the desired part can be removed.
4. Insert the needle bar down into the frame and put the
parts on the needle bar as it goes.
5. Attach the presser foot.
6. Adjust the needle height (see 32).
7. Adjust the presser bar height (see pages 20 and 21).
Needle bar
Needle bar spring
Needle bar holder
Spring base
Presser foot
spring (lower)
Presser foot block
Stop felt
Presser foot
holder
Presser foot
return spring
Lower felt base
Needle bar
holder screw
Содержание eXpressive 970
Страница 1: ...SERVICE MANUAL MODEL eXpressive 970...