Elite Greenhouses TITAN K800, Инструкции и иллюстрации

Страница: 10 / 36

6.
Roof corner bar—into the alternative bolt slot (facing sideways on
each roof corner bar), slide 6 bolts – 1 top, 1 bottom and 4 middle, put a
nut on and finger tip tighten, these will be used later in the general assem-
bly.
7.
Side corner bar— slide 3 bolts, 1 top, 1 bottom and 1 middle into
alternative bolt channel. Starting with the side corner bar put the eave gus-
set plate over the top bolt in the facing bolt slot utilising the bottom hole in
the plate. Slide the plate left or right until the next hole i.e. 2
nd
from the
bottom in the gusset plate lines up with the hole in the flange of the side corner bar. Put nuts on and
leave loose.
8.
Next using the bolt previously inserted in to the bottom of the roof corner bar in the facing
bolt slot, place the gusset plate over utilising the top hole in the plate. Do not put a nut on at this
stage.
9.
Slide the gusset plate left or right until the last hole not used (i.e. 2
nd
hole from top) lines up
with the hole in the flange of the roof corner bar. Put a nut on the bolt and leave loose.
The diagram of the gusset plate on page 8 will assist in the construction.
10. Attach the bottom cill to the side corner bar using the previously inserted bolt in the facing
bolt slot of the side corner bar. Slide the bolt downwards and into the slot on the cill. Put the nut
back on and finger tip tighten (see diagram on previous pages for more detailed description of this
assembly).
11. Next attach the wall bar and glazing bars to the cill (having first threaded the glazing bead in
to the channels of all bars). Starting with the wall bar, using the bottom bolt previously inserted into
the wall bar, offer the wall bar to the slotted hole in the bottom left side of the cill. Move the bolt
downwards and into the slotted hole. Put the nut back on and finger tip tighten.
12. The glazing bar can now be attached to the cill in the same way as the wall bar.
13. Both the glazing bar and wall bar can now be fitted to the flange in the roof corner bars. Insert
the bolt at the top of the wall bar and glazing bar in to the holes in the flange of the roof corner bar.
Put a nut on both bolts and finger tip tighten.