Elite Greenhouses 6'3" WIDE HIGH EAVE, Инструкции и иллюстрации

Страница: 5 / 32

HELPFUL HINTS

Please do take your time and be sure to read all instructions carefully before assembling.

Consider purchasing the Elite Construction pack to help with the installation – contact dealer
for details.

Do not assemble frame in high winds.

The greenhouse frame should be anchored to a permanent foundation. This will not only help
secure it against powerful winds but will help prevent breakage of the glass caused by the freezing
and thawing process of the earth.

When building your own brick/concrete foundations ensure that they are level and square oth-
erwise your frame will not be correct and the glass will not fit.

Be sure all four corners of the constructed greenhouse are square before installing glass, and
do not install the glass until the greenhouse is on a permanent foundation.

Do not place your greenhouse in vulnerable locations such as under trees, playing areas, etc.

Children should not play near glass greenhouses.

REMEMBER: glass is fragile, handle with care!

Protective eye glasses should be worn.

Gloves should be worn.

If your greenhouse is a powder coated one there are a few 1/8” holes in the end of the bars.
These are jig holes for the process and have no bearing on construction. (Key point).

When Powder Coated, the sub-frame assembly packages may slightly differ from the standard
alloy finish.

Powder coated packages are wrapped in polythene tubing – please be careful when opening
e.g. Do not run a knife down the sides as you can scratch the paintwork.

WHEN CONSTRUCTING A POWDER COATED MODEL PLEASE TAKE CARE
NOT TO DAMAGE THE FINISH BY WORKING ON CONCRETE OR PATIOS.

N.B. This plan covers the entire High Eave range. The only difference between a 6ft
long and an 8ft long for example are a few extra pieces of alloy, glass, nuts and bolts etc. The
construction of the sub-frame assemblies is the same but for the purposes of this booklet we
have used the 8 x 6 model as the benchmark. Therefore only one plan is needed.

We reserve the right to alter and improve our products.