Elite Greenhouses 6'3" WIDE HIGH EAVE, Инструкции и иллюстрации

Страница: 17 / 32

FITTING THE DOOR LOCK
The door lock must be fitted after the door is in position
(Key Point). Undo the ring bolt from the
door lock, and insert the barrel through the hole in the panel from the outside. Reattach the ring bolt
to the barrel on the inside, and tighten.
Now attach the cam lever and screw. Check before tightening that the cam moves in the correct di-
rection to lock when the key is turned.
The key can be taken out of the lock when in the lock or unlock position.
FITTING THE KEEP FOR THE LOCK
The cam on the lock must locate onto a door keep
which is fitted to the left hand glazing bar (when
viewed from outside) of the door gable end.
The keep has 2 horizontal slots on one face. Insert
2 cropped head bolts into the bolt channel of the
left hand glazing bar and line up with the slots in
the keep.
Close the door to the keep and adjust the height of
the keep until the cam on the lock locates in the
long oval slot
The picture shown is viewing the keep from the
inside.