Eliet MA 018 010 130, Руководство пользователя

Страница: 24 / 69

24
English
9.5 Driving with the machine
The ELIET Mega Prof weighs 860 kg and cannot be
moved by the operator without the aid of the wheel
drive.
Each of the two large traction wheels is driven by a
hydraulic motor.
• The diesel engine must be running before the
hydraulic system can operate. Start the engine in
accordance with the procedure described in chapter
9.4.
• Move the throttle to half speed.
• Move the control lever that surrounds the inlet to the STOP position.
• Make sure that the handlebar is folded upwards and locked with the pin.
• A rotatable handle is also mounted on the handlebar. This is used to control the drive to the
wheels.
• If you turn the handle forwards, the machine moves forwards. The more you turn the handle,
the more the ground speed increases in this direction of travel. If you turn the handle backwards,
the will move backwards at a speed that depends on how far the handle is turned.
• To drive the machine in a certain
direction, move the complete handlebar.
To turn to the left, push the handlebar
to the left. To move the small steering
wheels to the right, push the handlebar
to the right.
• When the machine is moving, there
is less resistance when you move the
handlebar.
TIP: First try to familiarise yourself with
the driving characteristics of a self-pro-
pelled machine at a large quiet location
away from bystanders.