Eliet MA 018 010 130, Руководство пользователя

Страница: 35 / 69

35
English
10. Transporting the Machine
• Make sure to clear the shredding chamber before moving the machine. Make sure that the feed
opening is free of branches.
• Before transporting the machine, it is advisable to disassemble the discharge screw so that the
machine is more compact. (Read the section about removing the discharge system).
• Use slip-resistant ramps to load the machine into a van or a trailer. Each ramp must be at least
400 mm wide. The load capacity must be based on a weight of 900 kg.
• Make sure that a suffi ciently large exit zone (10 m) is available behind the ramps.
• Make sure that the ramps are securely attached to the vehicle or trailer.
• Make sure that the parking brake of the vehicle is ON.
• The forwards or backwards slope may never exceed 15%.
• The maximum permissible lateral slope angle for the chipper/shredder is 8 %.
• Be careful and composed when loading and unloading the chipper/shredder machine so that it
does not tip over and cause an accident.
• When walking down a slope, move down backwards facing the machine. CAUTION : When walk-
ing down a slope, the machine can suddenly gain momentum due to its own weight. Make sure
that a suffi ciently large exit zone (10 m) is available behind the ramps.
• Before transporting the machine, fi rmly secure it to the vehicle. Use sturdy parts of the vehi-
cle’s chassis to attach ropes.
• The machine has 4 attachment points that can be used to secure ropes or attachment systems.
Do not overload the vehicle or means of transport. The machine weighs 860 kg.