Eliet GZC 1000, Руководство пользователя

Страница: 79 / 92

79
English
For your information:
when checking the chain tension, also check the chain and the sprocket for
extensive wear. If the teeth are worn the sprockets and chain must be replaced.
Visit your authorised ELIET
dealer for assistance.
Note : use this maintenance to lubricate the chain (read § 11.4.2.4).
Caution:
Chain tightening must be done with the engine switched off. Remove the key
from the starter lock as a precaution.
Caution:
Always wear suitable clothing for this type of maintenance.
• The chain is subject to loss of elasticity after time and it will start to hang loose, with a risk of
jumping off the gear under heavy strain. If you notice that the chain is loose when performing
maintenance, it must be tightened.
• Remove the protective cover on the right-hand side of the machine.
• The chain can be tensioned easily by lifting the chain up.
• To do so, loosen the (M10) nut that holds the chain tensioner
to the frame. Use a 17 mm ring spanner.
• Undo the M10 lock nut at the bottom of the control bolt (size
17 spanner).
• Turn the M10 control bolt anti-clockwise (size 17 spanner) so
as to move the chain tensioner upwards and thus tightening the chain.
• Beware: over-tightening the chain can lead to accelerated wear of the bearings and the chain.
• Re-tighten the M10 nut that holds the chain tensioner to the frame.
• Now re-tighten the lock nut on the control bolt.
• Carefully replace the protective cover and fasten it.