Eliet GZC 1000, Руководство пользователя

Страница: 81 / 92

81
English
12. Storing the machine
When storing the machine for an extended period, we recommend that you follow the steps
below:
• Clean the entire machine thoroughly. (Read § 9.7 Cleaning the machine.)
• Carry out large maintenance (see § 11.2).
• Check all nuts and bolts and fasten them where necessary. Most bolts require the use of
two spanners of 10, 13, 14, 17 or 19 mm and wrenches 4, 5 or 6.
• Empty the fuel tank either by running the engine until the machine runs out of fuel, or
by using a siphon to pump the petrol back into the jerrycan (read the safety instructions
under § 9.4 Refuelling).
• Remove the spark plug (see § 11.3.5 Checking and/or changing the spark plug). Spray some
penetrating oil with MoS2 into the cylinder. Pull the starter cord until the piston is in its
uppermost position.
• To avoid rust on the machine touch up all chipped areas or treat them with anti-rust
grease. Original paints/enamels in the appropriate colours are available from your ELIET
dealer.
• Store the machine in a cool, dry storage area, away from possible rain. If necessary, cover
it with canvas.
• If the machine is stored outdoors, it must be properly covered with canvas. Avoid direct
precipitation on the machine. ELIET highly recommends a sheltered storage place.