Eliet GZC 1000 Скачать руководство пользователя | Manualshive

Страница: 61 / 92

background image

61

English

• Since the oil level should reach the brim of the

filler opening, a low oil level is easy to spot. The oil
on the dipstick should touch the maximum mark.

• If the oil tank is not filled to the brim, this indicates

a lack of oil.

• It suffices to add some oil via the filler opening

until the proper level has been reached.

• Since the location of the filler opening is in a somewhat awkward position, we recommend the

use of a tube or special funnel to avoid oil spills. Always clean the funnel before passing any oil
through it.

• Only use recommended oil (see the list of recommended oils in § 11.2).
• Immediately remove any spilled oil.

Caution:

Avoid any dirt from leaking into the crankcase via the filler cap.

11.3.4 Changing the oil

• Make sure that the machine stands on an even surface and that the engine is switched off.
• Move the front weights on the machine to the side or remove one of them to provide better

access to the oil drainage plug and oil filler cap. Using front weights makes it easier to tilt the
machine forward.

• Have a 2 litre collection reservoir ready before unscrewing the plug.
• Clean the area around the oil filler cap and unscrew the cap, allowing the crankcase to vent

while emptying the tank.

• Now unscrew the plug from the drain with a 22 mm spanner

• Now lift the handlebar so that the machine

tilts forward over the front rollers. Maintain
this position.

• Place the receptacle in front of the machine

and twist out the drainage plug completely
from the motor base.

• Empty the entire contents (approx. 1.1 L)

from the motor. Make sure that all oil is
properly collected in the receptacle.

• Tilt the machine backward again.

Lowest level

Highest level

«
...
59
60
61
62
63
...
»

Содержание GZC 1000





























































































Отзывы:

Нет отзывов

Похожие инструкции для GZC 1000

Бренд: Gaspardo Страницы: 140

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды