Eliet GZC 1000, Руководство пользователя

Страница: 37 / 92

37
English
Caution:
Driving will only be allowed when:
• the gear shift is in forward (or reverse), AND
• the dead man’s handle is activated.
Caution:
When starting in forward motion, it is best to slowly press the dead man’s handle
and slightly lift the handlebar forward. Starting up the machine too quickly can
cause the machine to tilt backwards.
9.6.1.2 Bending
To take a curve with the machine, one has to create different traction between the two front
rollers. This is done simply by moving the handlebar into either direction.
For left bends, the speed of the right hand roller must be greater than that of the left roller - one
will move the handlebar to the right.
For right bends, the speed of the left hand roller must be greater than that of the right roller -
one will move the handlebar to the left.
.
Caution:
In view of the chain transmission connecting the rear roller to the front left
roller, the rear of the machine will have to be lifted slightly when taking a curve.
Front weights can be mounted on the front of the machine.
ELIET recommends their use: they serve as counterweights and make it easier to lift the rear of
the machine.
9.6.1.3 Turning
If you reach the end of a strip and want to turn around to work the adjoining strip, you have two
options depending on the available (free) space.
Method A - sufficient free turning space
In this case the operator has sufficient free space to turn. At the end of the strip, he slightly lifts
the rear of the machine and moves the handlebar to the right (in this particular example). Once
the 180° turn is complete, the handlebar is placed back into its centre position and the machine
is lowered to the ground.