Eliet GZC 1000, Руководство пользователя

Страница: 54 / 92

54
English
• Inclines must always be ascended in a forward direction and descended in reverse.
• Never try to push the machine up, or let it roll down, a slope in the ‘neutral’ position. Once
rolling, the machine will be hard to control. Always use the engine’s traction power to ascend a
slope, and its braking power to descend a slope. Always use the lowest gear for this purpose.
• Take good care at the ramp angle at the top. A dangerous situation can occur if the bottom of
the machine were to make contact with the ramp angle and the rollers lose contact and grip on
the ramps as a result. Be prepared for this and reduce speed. Lean over or push your weight
on the handlebar at the moment you pass over the ramp angle. This will relieve the front of
the machine, reducing the risk of damage (to the vibrating harrows, ...) on contact; it also puts
additional pressure on the rear of the machine, allowing better grip of the rollers and reducing
their risk of slipping.
• If you risk losing control over the machine, then immediately release the operating handles.
• if necessary, push the machine away from you and step aside. The hydrostat will slow down the
machine or halt it.
• Keep in mind that starting the machine too quickly can cause the machine to tilt backwards.
• Ask someone to assist you if you feel insecure about loading the machine.
• Ensure that the vehicle has sufficient bearing power to transport the machine.