Elektron Analog Rytm Скачать руководство пользователя

Страница: 56 / 98

13. GLOBAL MENU

13.6 TRACK ROUTING

In this menu, you can customize track routing. Use

[ARROW]

keys

[UP]

and

[DOWN]

to highlight one of the

two options.

ROUTE TO MAIN

highlight this option to customize which of the 12 tracks will send to the main output.

Use the

[PADS]

to activate/deactivate send from the track of each corresponding pad. <PADS> of a

green color send to main. Unlit <PADS> do not. Note that each track will still send to its individual output.

ROUTE TO FX

highlight this option to customize the FX routing of the 12 tracks. Use the

[PADS]

to acti-

vate/deactivate each corresponding track for routing through the FX. <PADS> of a yellow color route to

FX. Unlit <PADS> do not.

13.7 SYSEX DUMP

In the SYSEX DUMP menu, kits, Sounds, patterns, songs and global slots can be sent and received. Note

that Sample transfer is handled exclusively via the SAMPLES menu (see above). Select a menu option using

[UP]

[DOWN]

or the LEVEL knob. Press

[YES/SAVE]

to open the highlighted menu selection.

When receiving or sending SysEx data, the MIDI ports or the USB port of Analog Rytm must be connected

to the external sending/receiving device.

•

If the Analog Rytm sends or receives SysEx data through the MIDI ports, use the

Elektron TM-1 USB MIDI interface for up to 10x transfer speeds.

•

If the external device is a computer, we recommend using our free SysEx utility C6,

which can be downloaded from the Elektron website.

13.7.1 SYSEX SEND

Here kits, Sounds, patterns, songs and global slots can be sent to an external device via the MIDI OUT

port or the USB port of Analog Rytm.

The column to the left selects what will be backed up. Select the column using the

[LEFT]

arrow key. Use

the

[UP]

[DOWN]

keys or the LEVEL knob to scroll through the column. The SysEx data send alterna-

tives located in the column to the right will change depending on the selection made in the left column.

Press the

[RIGHT]

arrow key to access this column. Use the

[UP]

[DOWN]

keys or the LEVEL knob to

select what will be sent. Press

[YES/SAVE]

to initiate the SysEx send procedure.

ALL

offers the possibility to do complete backups of various data.

• WHOLE PROJECT will send all kits, Sounds, patterns, songs and global slots + settings to the re-

ceiving device. I.e. the complete project.
• ALL SOUNDS will send all Sounds to the receiving device.
• ALL KITS will send all kits to the receiving device.
• ALL PATTERNS will send all patterns to the receiving device.

Содержание Analog Rytm



































































































Результаты поиска

Содержание Analog Rytm

Отзывы:

Похожие инструкции для Analog Rytm

Бренды по названию

Популярные бренды

Elektron Analog Rytm, Руководство пользователя

Результаты поиска

Содержание Analog Rytm

Отзывы:

Похожие инструкции для Analog Rytm

Бренды по названию

Популярные бренды