Elektron Analog Rytm страница 34 Скачать руководство пользователя

Страница: 34 / 98

10. KITS AND SOUNDS

•

Copy, clear and paste operations are available in the SOUND BROWSER and

SOUND MANAGER.

•

Use the

LEVEL

knob to increase scrolling speed in the SOUND BROWSER and

SOUND MANAGER.

10.6 PLAYING A SOUND

Play the drum track Sounds of the active kit by tapping any of the twelve

[PADS]

. <PADS> will briefly flash

when tapped. Each pad is velocity sensitive, which means a gentle rap and a decisive stab on the pad will

produce drum sounds of different intensities.
Use

[FUNCTION]

[PADS]

to trig the Sound at the velocity set on the trig page for each track (the VEL

parameter).
The

[TRIG]

keys 1-12 can also be used to play the Sounds of the twelve tracks, also at the velocity set on

the trig page for each track.
Press and hold

[RETRIG]

, then press and hold any of the

[PADS]

to continuously retrig the track Sound for

as long as the pad is held. Play drum rolls in this manner on one or several of the pads, each with its own

assignable retrig settings. Pressure controls retrig velocity. Aftertouch is disabled during retrig. See “11.4

RETRIG MENU” on page 39.
Sounds that are designed for aftertouch play may be played by tapping and then pressing a pad without

lifting your finger in between. Settings controlling this can be found in the SOUND menu. See “10.5 SOUND

MENU” on page 31.

PLAYING A SOUND WITH AN EXTERNAL MIDI UNIT

Besides using the

[PADS]

, the Sounds can also be played using an external MIDI unit connected to Analog

Rytm. Which MIDI tracks the voices respond to are set up in the MIDI CHANNELS menu, covered in the

section “13.5.3 MIDI CHANNELS” on page 55.

10.7 EDITING A SOUND

Activate one of the drum tracks for editing by pressing

[TRACK]

+ one of the

[PADS]

. The information bar

on the LCD screen, showing which kit is loaded, will briefly change to show the name of the drum track

Sound. When editing, the MACHINE, Sound and sample settings of the track can be changed, and any

changes made will be stored as part of the active kit.
Adjust the overall volume level of the active drum track with the

LEVEL

knob.

The current MACHINE in use will determine which SYNTH parameters will be available for Sound modula-

tion. Quickly press the first

[PARAMETER]

key, SYNTH, twice to open a menu for MACHINE selection.

Browse through the MACHINE list using the

[ARROW]

keys

[UP]

and

[DOWN]

. Sample the MACHINE

currently outlined by tapping the pad of the active track. Select the outlined MACHINE by pressing

[YES/

SAVE]

. Exit without switching MACHINE by pressing

[NO/RELOAD]

Edit a track Sound by adjusting the parameters found on the PARAMETER pages. Access these pages by

pressing one of the five

[PARAMETER]

page keys. Use the

DATA ENTRY

knobs

A-H

to change the pa-

rameters. For a complete description of the functions of the parameters, please see “APPENDIX A: DRUM

TRACK PARAMETERS” on page 70.

SYNTH

controls the analog drum synthesis parameters of the MACHINE selected.

SAMPLE

controls the sample selection and settings.

FILTER

controls the filter mode, cutoff frequency, and envelope.

AMP

controls the amplitude parameters, effect sends, and levels.

LFO

controls parameters for the LFO of the active track.

When you want to save a particular Sound with all its current parameter settings, use the quick command

[YES/SAVE]

[MUTE]

. Toggle destination, Sound Pool or +Drive, by accessing the left-hand menu,

[AR-

ROW]

key

[LEFT]

, then press

[YES/SAVE]

. Select which slot to save to using the

[ARROW]

keys

[UP]

and

Содержание Analog Rytm



































































































Результаты поиска

Содержание Analog Rytm

Отзывы:

Похожие инструкции для Analog Rytm

Бренды по названию

Популярные бренды

Elektron Analog Rytm, Руководство пользователя

Результаты поиска

Содержание Analog Rytm

Отзывы:

Похожие инструкции для Analog Rytm

Бренды по названию

Популярные бренды