Elektron Analog Rytm страница 53 Скачать руководство пользователя

Страница: 53 / 98

13. GLOBAL MENU

NAMING SCREEN” on page 17. Give your new destination directory an appropriate name. Once the

new directory has appeared on the main screen, open it by pressing

[YES/SAVE]

. In the initially empty

directory, press

[ARROW]

key

[LEFT]

to open the left side menu. Highlight UPLOAD HERE and press

[YES/SAVE]

Consequently, samples sent from a computer will be written into the new destination directory. Note that

any new or existing directory can be set to be the destination directory in a similar manner, accessing the

left side menu, except for the FACTORY directory which is write-protected. Any directory (again, except

the FACTORY directory) can be deleted or renamed by highlighting it, accessing the right-hand menu

and selecting DELETE DIR or RENAME.

•

Make sure you have the latest version of the SysEx utility software C6 installed on your

computer to efficiently and reliably transfer samples to the Analog Rytm +Drive stor-

age. The C6 software can be freely and conveniently downloaded from the Elektron

website.

•

Please note that the Analog Rytm will not appear as an icon on your computer desktop.

Use the c6 software for all transfers.

•

If MIDI+USB is selected in the INPUT FROM and/or OUTPUT TO settings on the MIDI

PORT CONFIG menu (see below), MIDI data transfers will limit the USB speed. When

sending or receiving large chunks of data, make sure you use only the USB setting.

13.3 GLOBAL SLOT

Selects which of the four Global slots to use. Select the active slot by using the

[LEFT]

[RIGHT]

arrow

keys. Press

[YES/SAVE]

to confirm the selection. All changes made to a Global slot are automatically

saved. A slot stores the current configuration of the sequencer, MIDI and track routing settings. All changes

made to a Global slot are automatically saved.

13.4 SEQUENCER CONFIG

Here settings relating to the sequencer can be found. Change settings by using the

[LEFT]

[RIGHT]

arrow

keys or the

[YES/SAVE]

key.

QUANTIZE LIVE REC

will when active quantize notes entered in LIVE RECORDING mode to complete

sequencer steps. When the setting is deactivated, live recorded notes will where applicable be affected by

micro timing. Read more about micro timing in the section “11.7 TRIG MENU” on page 41.

KIT RELOAD ON CHG

will cause kits to reload to their saved state automatically as soon as a new kit be-

comes active. This is useful if you for example play live, have tweaked a kit extensively and want it to return

to its saved state automatically next time it becomes active again.

13.5 MIDI CONFIG

In this menu, various sub-menus dealing with the MIDI functionality of Analog Rytm are found.

Содержание Analog Rytm



































































































Результаты поиска

Содержание Analog Rytm

Отзывы:

Похожие инструкции для Analog Rytm

Бренды по названию

Популярные бренды

Elektron Analog Rytm, Руководство пользователя

Результаты поиска

Содержание Analog Rytm

Отзывы:

Похожие инструкции для Analog Rytm

Бренды по названию

Популярные бренды