Elektron Analog Rytm Скачать руководство пользователя

Страница: 42 / 98

11. THE SEQUENCER

GLOBAL QUANTIZE

will affect all micro-timed trigs of all tracks. The higher the quantize value, the more

all micro-timed trigs will be quantized. Range 0-127.

TRK QUANTIZE

will affect all micro-timed trigs of the active track. The higher the quantize value, the

more all micro-timed trigs will be quantized. Range 0-127.

11.8 CLICK TRACK

The CLICK TRACK menu controls the internal metronome of Analog Rytm. Open the menu by pressing

[FUNCTION]

[RETRIG]

. Use the

[UP]

[DOWN]

arrow keys or the

LEVEL

knob to scroll through the list of

settings. Press

[LEFT]

[RIGHT]

or any of the

DATA ENTRY

knobs to change the highlighted setting.

ACTIVE

activates/deactivates the metronome. It is also possible, outside of this menu, to keep

[FUNC-

TION]

[RETRIG]

pressed for a second to toggle the metronome click on or off.

TIME SIG. NUM

controls the note measure of the metronome time signature.

TIME SIG. DEN

controls the beat measure of the metronome.

PREROLL

controls for how many bars the metronome will sound before the sequencer starts playing.

This setting is only relevant when LIVE RECORDING mode is initiated.

VOLUME

controls the volume of the click.

11.9 SCALE MENU

The length and timing of the pattern can be changed on this screen. Two modes exist in the SCALE menu.

In NORMAL mode all tracks share the same length. In ADVANCED mode each track can have different

lengths. Access the SCALE SETUP menu by pressing

[FUNCTION]

[PAGE]

. Use the

[LEFT]

and

[RIGHT]

arrow keys to select between the available settings. Use the

[UP]

and

[DOWN]

keys to adjust the different

settings and to select between the two modes.

11.9.1 NORMAL MODE

This is the default mode. In this mode, all tracks of the pattern share the same length and time signature.

This screen will appear when the NORMAL setting is active.

The first two settings control the step length of the pattern. The leftmost number selects the number of

steps in the pattern. The maximum number of steps available to the pattern is determined by the total

length, set by the parameter to the right. This can be either 16, 32, 48 or 64 steps. If 17 steps or more

are used in a pattern, the

[PAGE]

key is, while in GRID RECORDING mode, used to toggle between the

different pattern pages.
The rightmost parameter controls the time signature of the pattern. It offers seven possible settings,

1/8X, 1/4X, 1/2X, 3/4X, 1X, 3/2X and 2X. A setting of 1/8X will play back the pattern at one-eighth of the

set tempo. 3/4X plays the pattern back at three-quarters of the tempo. 3/2X will play back the pattern

twice as fast as the 3/4X setting. 2X will make the pattern play at twice the BPM.

Содержание Analog Rytm



































































































Результаты поиска

Содержание Analog Rytm

Отзывы:

Похожие инструкции для Analog Rytm

Бренды по названию

Популярные бренды

Elektron Analog Rytm, Руководство пользователя

Результаты поиска

Содержание Analog Rytm

Отзывы:

Похожие инструкции для Analog Rytm

Бренды по названию

Популярные бренды