Elektron Analog Rytm страница 15 Скачать руководство пользователя

Страница: 15 / 98

5. OVERVIEW OF THE ANALOG RYTM DATA STRUCTURE

5.2.6 SONGS

16 songs are available for each project. They are used to sequence the playback of patterns. Songs are

built of patterns and chains. Read more about songs in the section “12.2 SONGS” on page 48.

5.2.7 GLOBALS

The GLOBAL settings contain overarching settings for the sequencer, MIDI, and global track routing.

Four global slots are available for each project, each with its own specific settings. Read more about the

global settings in the section “13. GLOBAL MENU” on page 51.

5.3 ABOUT THE TRACKS

5.3.1 THE DRUM TRACKS

There are 12 drum tracks. To select a track for editing, press and hold

[TRACK]

key and then press one

of the

[PADS]

. Each drum track uses a specific drum voice controlled by one of the MACHINES available

for the voice. All drum tracks can layer analog percussion sounds and sampled sounds, to distort and

filter them, and apply a dedicated LFO each.

5.3.2 THE FX TRACK

The FX track controls the Analog Rytm send effects DELAY and REVERB, as well as the DISTORTION

and COMPRESSOR master effects. One LFO is also available for this track. To select the FX track for

editing, press the

[FX]

key.

5.3.3 EDITING THE TRACKS

The five

[PARAMETER]

keys open parameter pages that are used for editing the tracks. The SYNTH

page of a drum track contains different parameters depending on the MACHINE chosen for the analog

percussion sound generator. The other pages are identical for all drum tracks; the SAMPLE page for

the sample playback engine, the FILTER page for the multimode filter and its filter envelope, the AMP

page for the amplitude envelope and effect sends, and the LFO page for the low-frequency oscillator.

The corresponding five parameter pages for the FX track controls the four effects and the FX LFO. Edit

parameters using the

DATA ENTRY

knobs

A-H

. Press and turn a knob to adjust its parameter in larger

increments.

Содержание Analog Rytm



































































































Результаты поиска

Содержание Analog Rytm

Отзывы:

Похожие инструкции для Analog Rytm

Бренды по названию

Популярные бренды

Elektron Analog Rytm, Руководство пользователя

Результаты поиска

Содержание Analog Rytm

Отзывы:

Похожие инструкции для Analog Rytm

Бренды по названию

Популярные бренды