Electrolux MAGISTAR OVEN 6-10-20GN, Руководство по обслуживанию, Страница: 2 / 124

2
Foreword
Visit our website www.electroluxprofessional.com and open the Support section to:
Register your product
Get hints & tips of your product, service and repair information
The service manual (hereinafter Manual) provides the engineer with information necessary for correct and safe care of the
machine (hereinafter “machine“, “appliance“ or “unit)“.
The following instructions are intended to maintain the machine performance and to preventing injury to persons and animals and
damage to property due to improper operating procedures.
All persons involved in machine transport, installation, commissioning, use and maintenance, repair and disassembly must con-
sult and carefully read this manual before carrying out the various operations, in order to avoid wrong and improper actions that
could compromise the machine's integrity or endanger people.
If, after reading this manual, there are still doubts regarding machine use, do not hesitate to contact the Manufacturer or Customer
Care to receive prompt and precise assistance for better operation and maximum efficiency of the machine. During all stages of
machine assessment, always respect the current regulations on safety, work hygiene and environmental protection. It is the user's
responsibility to make sure the machine is started and operated only in optimum conditions of safety for people, animals and
property.
IMPORTANT
• The manufacturer declines any liability for operations carried out on the appliance without respecting the instructions
given in this manual as well as for operations carried out by the user without respecting the instructions given in the
user manual.
• The manufacturer reserves the right to modify the appliances presented in this publication without notice: manufac-
turer’s relevant technical bulletins should be used as integration(s)/addendum(s).
• No part of this manual may be reproduced without the consent of the manufacturer.
• This manual is available in digital format by:
– contacting the reference customer care;
– downloading the latest and up to date manual/technical bulletin (s) on the web site;
–
https://electroluxprofessional.com/
• The manual must always be part of the documentation available when servicing the machine.
Revision update
Edition Description Date
1.00 First edition of Service manual relative to SETTINGS AND SOFTWARE,
TOUCH/DIGIT electronic boards. Nov. 2019
1.01 Update of the Service Manual for new software version 4.3.7 on TOUCH
ovens. Some updates to Digit too.
Updates in:
• D.3.1.3 Accessories, enable in software section (TOUCH)
• D.3.2.17 Boiler Maintenance / Descale section (TOUCH)
• D.3.3 Software update Level T, K (Touch screen) section (TOUCH)
• D.3.3.5 Programming Parameters upload (Parameters Upload) sec-
tion (TOUCH)
• D.3.3.6 PNC and SERIAL number writing in the identity card section
(TOUCH)
• Boiler ordinary maintenance / Descale section (DIGIT)
• F.2
Alarms and Warnings - Eotd 70 ℃ —> 100 ℃ / Htd 90 ℃ —>115 ℃ .
Dic. 2019
1.02 Update of the Service Manual for new sections:
• F.3 EH2O, Desc, Wizard blocked - Level T,K, (Touch) ;
• F.4 EH2O, DESC ALARM Level B, C (Digit) – Cleaning Abort .
Dic. 2019
2 Update of the Service Manual for new software version 1.0.18 on DIGIT
ovens.
Update of:
• F.4
EH2O, DESC ALARM Level B, C (Digit) – Cleaning Abort section.
Added new sections:
• D.2
Software Editions section;
• F.4 EH2O, DESC ALARM Level B, C (Digit) – Cleaning Abort section
– Software from 1.1.0;
• F.4 EH2O, DESC ALARM Level B, C (Digit) – Cleaning Abort section
– Software from 1.0.18.
Jan. 2020