Electrolux EWFLW65H - 27'' Front-Load Washer, Техническое и сервисное руководство

Страница: 66 / 92

4-4
Component Teardown
Striker Plate Removal
The striker plate is secured with two long coarse
thread screws to the inner face of the door assem-
bly. The striker assembly is secured to the striker
plate with two shorter countersunk screws. The
striker assembly may be removed without removing
the striker plate.
To remove the striker plate:
1. Using a #2 square bit screwdriver, remove
the two long, course thread, countersunk
screws. (See Figure 4-5)
2. Tilt and pull forward to remove.
3. Using a #2 square bit screwdriver, remove
the two countersunk screws securing the
striker assembly to the striker plate.
(See Figure 4-5)
Inner Door Glass Removal
The inner door glass is secured with screws that
pass through two retaining covers that are
mounted to the inner door assembly.
To remove the inner door glass:
1. Remove door assembly from unit.
2. Remove the striker plate.
3. Using a #2 square bit screwdriver, extract
the screws from the two retaining covers and
pull from door assembly. (See Figure 4-6)
4. Lift the inner door glass from door assembly.
Latch Indicator Removal
The latch indicator is secured by retaining latches
to the interior of the door assembly.
To remove the latch indicator:
1. Remove door assembly from unit.
2. Remove the striker plate.
3. Grasp the indicator on the latch side between
finger and thumb and rock it upward, pivoting
away from the center of the glass.
(See Figure 4-7)
4. Gently push the indicator toward the center
of the lens to release the tab.
5. Rock the tab upward. (See Figure 4-8)
6. Pull the indicator out and remove from unit..
(See Figure 4-8)
Figure 4-5.
Figure 4-6.
Figure 4-7.
Figure 4-8.
Striker Plate
Screws
Screws
Striker Assy.
Screws