Electrolux EWFLW65H - 27'' Front-Load Washer, Техническое и сервисное руководство

Страница: 32 / 92

Installation Information
2-16
Removing Hole Plug
1. Grasp the hole plug between finger and
thumb and rock it upward, pivoting it away
from the center of the glass, releasing the
tab. (See Figure 2-28)
2. Connect the harness to the door lock by
inserting it in the terminal and firmly pushing
it in place.
3. Insert the harness connection through the
front panel first, and then pivot the lock until
it is flush. Slide the lock toward the center of
the front panel until the screw holes line up.
(See Figure 2-29)
4. Secure the lock with 2 short, course-thread,
panhead screws.
Reinserting Latch Indicator
1. Rotate the latch indicator and move it to the
opposite hole in the door.
2. Grasp the indicator between finger and
thumb and slide it through the opening.
(See Figure 2-30)
3. Gently push the indicator toward the center
of the glass and pivot the tab downward into
the retaining slot. (See Figure 2-31)
4. Pivot the indicator downward toward the
center of the glass until it is in place.
Figure 2-28.
Figure 2-29.
Figure 2-30.
Figure 2-31.