Electrolux EWFLW65H - 27'' Front-Load Washer, Техническое и сервисное руководство

Страница: 69 / 92

4-7
Component Teardown
Reinstalling or Replacing the Bellows:
Using liquid dishwasher soap to lubricate the
groove on the bellows will make it easier to the slip
the groove on the bellows onto the lip of the tub.
1. There is a tab and an arrow on the top of the
tub lip, a slot in the groove and an arrow at
the top of the bellows. (See Figure 4-17)
2. Place the slot over the tab and while holding
the bellows in place with one hand, place the
other hand inside the bellows and force the
groove of the bellows over the lip of the tub
with your thumb.
3. Work your way about one third way around the
tub, then pull in on the inside flap of the
bellows to seat the bellows into the lip of the
tub.
4. Using your thumb, start on the other side of
the top tab and force the bellows on in the
other direction. Again about one third of the
way around stop and seat the bellows onto the
tub lip. Force the remaining bellows on with
your thumb and seat it. (See Figure 4-18)
5. To install the spring, fold the front of the
bellows back into the tub.
6. Place the spring in the groove at the top of the
bellows and wedge a round object, about 3/4 “
in diameter between the weight ring and the
bellows to hold the spring in the groove.
(See Figure 4-19)
7. Pull the spring with one hand while working it
into the grove with the other.
8. Remove the wedge, unfold the bellows, and
insert the advance rinsing technology hose
and light socket.
Figure 4-17.
Figure 4-18.
Figure 4-19.
Bellows
Bellows
Bellows
Bellows
Wash Tub
Weight Ring
3/4” Tubing