Electrolux EWFLW65H - 27'' Front-Load Washer Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 92

background image

Electronic Control

3-21

Diagnostic Test

The diagnostic test is used to check individual component function only.

To Start the Diagnostic Test

1.

Press the “CANCEL” button to enter standby mode and enable diagnostic entry.

2.

Within 10 seconds after pressing “CANCEL”, press any button to wake up the control.

3.

Within 5 seconds of wake up, turn the selector knob to the far left cycle and press and hold the
“CANCEL” and the far left button under the display simultaneously for 3 seconds to enter the
Diagnostic Mode.

NOTE:

To save time at wake up, the welcome screen can be bypassed by turning the selector knob).

1.

Upon entering Diagnostic Mode, all lights should flash for IQ Touch™ models and all lights on for the
Wave Touch™ models.

2.

Turn the program knob (1) click clockwise from the start position. The hot water solenoid will activate
and hot water should enter through the detergent compartment.

3.

Turn the program knob (2) clicks from the start position. The bleach water solenoid will activate and
cold water should enter through the bleach compartment.

4.

Turn the program knob (3) clicks from the start position. The bleach and the wash water solenoids will
activate and cold water should enter through the softener compartment.

5.

Turn the program knob (4) clicks from the start position. The prewash solenoid will activate and cold
water should enter through the prewash compartment.

6.

Turn the program knob (5) clicks from the start position. The door lock solenoid will deactivate and the
loading door can be opened. When the door is opened, the drum light should turn on.

7.

Turn the program knob (6) clicks from the start position. The door lock will activate and the washer will
fill then tumble. Once tumbling has started, the Boost Heater will turn on.

8.

Turn the program knob (7) clicks from the start position. The drain pump will activate draining out any
water in the tub and the washer will operate in high spin.

9.

Turn the program knob (8) clicks from the start position. This is a free position.

10. Turn the program knob (9) clicks from the start position. The control will signal the last 5 error codes

with E00 being no error.

11. Turn the program knob (10) clicks from the start position. Latest software version will be shown.

12. If applicable, turn the program knob (11) clicks from the start position. This is a free position.

Exiting Diagnostic Mode

To return the washer to normal operation:

1.

Unplug the power cord, wait 5-8 seconds, then reconnect the power cord OR

2.

Turn the program knob clockwise back to the Start Position. Press the “CANCEL” and far left button
under the display until the LEDs stop flashing.

«
...
57
58
59
60
61
...
»

Содержание EWFLW65H - 27'' Front-Load Washer





























































































Отзывы:

Нет отзывов

Похожие инструкции для EWFLW65H - 27'' Front-Load Washer

Бренд: lamber Страницы: 19

Бренд: Rac Страницы: 11

Бренд: MAKINEX Страницы: 41

AdoraDish V2000

Бренд: V-ZUG Страницы: 52

Бренд: ZANKER Страницы: 40

K 4 Universal Edition

Бренд: Kärcher Страницы: 32

Бренд: Hotpoint Страницы: 16

Бренд: Rangemaster Страницы: 28

Бренд: Indesit Страницы: 16

Бренд: Belling Страницы: 24

Бренд: Campbell Hausfeld Страницы: 48

Бренд: Smeg Страницы: 14

Бренд: Speed Queen Страницы: 24

Бренд: Ariston Страницы: 60

Бренд: Kuppersberg Страницы: 148

Бренд: Hotpoint Страницы: 20

Бренд: F.F. Group Страницы: 76

WF702Y4BK Series

Бренд: Samsung Страницы: 704

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды