Electrolux Professional WB6-20, Руководство по установке

Страница: 53 / 72

Installation manual
53
Run the cables along the machine base and then towards the electrical panel.
Secure the cables using plastic collars.
Connect the 3 power wires (L1, L2 and L3) from the heat exchanger to breaker Q2 and connect the earth wire to the
unused terminal.
Plug the 2-pin connector into terminal J239 on the A2 I/O card.
22.3 Connection of the evacuation pipe of the gas exchanger
22.3.1 Fresh air inlet
To allow the gas exchanger to work at its best, it is important that the laundry air inlet passes through an opening from
the outside.
The fresh air arrival must be equivalent to the volume of evacuated air.
In order to prevent drafts in the room, the best solution is to place the air inlet behind the machine.
It is essential that the rooms should be ventilated.
The free section of the air inlet must be five times greater than the section of the evacuation pipe.
Do not forget to allow for the fact that grills often occupy half the total area of the free air opening.