Electrolux Professional WB6-20, Руководство по установке

Страница: 59 / 72

Installation manual
59
TABLE OF CORRESPONDENCES — Washer-Extractor WB6–27
Category
index
Type of
gas
Working
supply
pressure
in mbar
Hi in MJ/m 3
Ø of injec-
tors in mm
Pressure
at injectors
in mm H
2
O
Heat
emission
Qn in kW
(Hi)
Consump-
tion
Mn in kg/h
(Hi)**
Consump-
tion
Vn in m 3 /
h**
*2E, 2H,
2ESI
G20 20 34.02 2.90 153 40 - 0.90
2L, 2ESI
G25 25 29.25 3.20 154 40 - 1.05
3P G31 37 46.34 1.85
regulator
out of
operation
40 0.66 -
3P G31 50 46.34 1.70
regulator
out of
operation
40 0.66 -
*For Belgium, no work is allowed between G20 and G25.
** normal cycle : prewash 3 min at 35 °C, drain. 2 min, main wash 4 min at 65 °C, drain 2 min, rinse 2 min, extract. 2
min, rinse 2 min, extract 2 min, rinse 2 min, extrac. 10 min (cold water supply at 15 °C).
Note!
G20 (H) = natural gas, Lacq type (20 mbar)
G25 (L) = natural gas, Groningue type (20 or 25 mbar)
G31 = propane gas (28/30, 37, 50 mbar)
TABLE OF CORRESPONDENCES — Washer-Extractor WB6–35
Category
index
Type of
gas
Working
supply
pressure
in mbar
Hi in MJ/m 3
Ø of injec-
tors in mm
Pressure
at injectors
in mm H
2
O
Heat
emission
Qn in kW
(Hi)
Consump-
tion
Mn in kg/h
(Hi)**
Consump-
tion
Vn in m 3 /
h**
*2E, 2H,
2ESI
G20 20 34.02 2.90 153 40
-
1.30
2L, 2ESI
G25 25 29.25 3.20 154 40 - 1.50
3P G31 37 46.34 1.85
regulator
out of
operation
40 0.95 -
3P G31 50 46.34 1.70
regulator
out of
operation
40 0.95 -
*For Belgium, no work is allowed between G20 and G25.
** normal cycle : prewash 3 min at 35 °C, drain. 2 min, main wash 4 min at 65 °C, drain 2 min, rinse 2 min, extract. 2
min, rinse 2 min, extract 2 min, rinse 2 min, extrac. 10 min (cold water supply at 15 °C).
Note!
G20 (H) = natural gas, Lacq type (20 mbar)
G25 (L) = natural gas, Groningue type (20 or 25 mbar)
G31 = propane gas (28/30, 37, 50 mbar)
Important
Tightness test after installation.
The gas leak test is performed as follows :
1. Paint pipe joints, pilot gas tubing connections and inspect outlets with rich soap and water solution ; do not
use an aggressive soap.
2. Put the machine into service. Bubbles indicate a gas leak.
3. Eliminate this leak.
Note!
After all intervention, re-seal (red varnish) the following adjustment organs:
— regulator of pressure.
In case of changing of gas, the stick for the adjustment has to be modified.