Electrolux Professional WB6-20 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 72

background image

28

Installation manual

13 Mechanical installation

Depending on its destination, the washer extractor is delivered bare or may be placed on a transport pallet and/or
packed with plastic film.
In some cases, it may be delivered in a crate, or in maritime packing (wood box).

13.1 Unpacking

Take off the plastic film or remove the machine from his transport pallet.
Please refer to the handling chapter in this instruction handbook for a description of handling operations.

Important

Check that no damage has been caused during transport.

13.2 Installation

The installation must be done by competent technicians in accordance with local codes and regulations. When there
are not local codes and regulations, the installation must be comply with European standards applicable.
The machine must be installed on a perfectly even surface, strong and horizontal, capable resisting to the efforts
shown in the technical characteristics.
Adjustment of the machine by addition of level plate should be avoided.
Control the horizontal level using a water level placed on the machine's sole.
Place the washer extractor so that it is easy for the user and the service technician to do their work.

Leave at least 1 m (40″) (according to the recommendation in standard EN 60204) between the machine, a wall or
any other machine at the sides.

13.3 Installing the shock absorber runners

Preparation of the ground and the machine.

• Carefully degrease the ground and the machine’s base plates.
Positioning the shock absorber runners.

• Place each shock absorber runner (P) at its respective location (see diagram) raising each of the machine’s sup-

port points in series and taking care to let the runner inside of the base plates.

Commissioning the machine

• Time: before commissioning the machine, each support point must be embedded by being crushed in by the run-

ner’s upper layer and the lower layer must have been pushed into the porosity in the ground.
The crushing time is 2 hours at an ambient temperature of 18 °C.

«
...
26
27
28
29
30
...
»

Содержание WB6-20









































































Отзывы:

Нет отзывов

Похожие инструкции для WB6-20

Spacemaker DSKS333EC

Бренд: GE Страницы: 3

Бренд: Jackson MSC Страницы: 53

Бренд: Candy Страницы: 17

Бренд: Kärcher Страницы: 40

Бренд: Kärcher Страницы: 48

Бренд: Kärcher Страницы: 12

Бренд: Sagola Страницы: 36

Бренд: Haier Страницы: 20

Бренд: Parkside Страницы: 33

Бренд: Maytag Страницы: 56

HG4585C107636RW

Бренд: Hanseatic Страницы: 82

Бренд: X4 TOOLS Страницы: 16

Бренд: AR Blue Clean Страницы: 48

Бренд: Ryobi Страницы: 17

Бренд: Landa Страницы: 34

Бренд: Ardo Страницы: 52

Бренд: Generac Power Systems Страницы: 22

Бренд: Hotpoint Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды