ELECTRIC MOTION EMTL01-J, Руководство пользователя

Страница: 7 / 48

7
EM-TL01-J

OWNER’S MANUAL

2014
3. REAR SUSPENSION EMSport
HYDRAULIC SETTING
Table 1 : Hydraulic Setting
It is better to start to close the hydraulic screwing the screw to the stop and to unscrew to the required position.
Factory setting: 10 notches.
SPRING PRELOAD SETTING
Rear suspension becomes accessible to lifting the rubber wheel arch, behind the rear wheel.
The preload setting can be modified screwing and unscrewing the grooved nut.
This grooved nut is camp with the clamping nut.
Factory setting: The length of the spring is 122mm.
HARD MIDDLE SUPPLE
Number
of notchs
0 – 7 7 – 14 14 - 20
Figure 2 : Réglage hydraulique amortisseur
The setting is accessible from the right of the
motorcycle on the top of the suspension with
Allen key 4 mm.
20 notches exist to adjust the hydraulic system.
Grooved nut
Clamping
screw
Figure 4 : Spring preload Setting
Figure 3 : Clamping screw
Figure 1 : Hydraulic setting