ELECTRIC MOTION EMTL01-J, Руководство пользователя

Страница: 12 / 48

12
EM-TL01-J

OWNER’S MANUAL

2014
❺ Push in the compression group and
remove the snap ring from its seat.
❻ Remove the compression unit:
- Place the cartridge on a basin for collecting oil and slide the rod
into
the tube of the cartridge until complete discharge of oil.
- Replace the hydraulic unit in the cartridge.
- Replace the snap ring in its housing (see figure), making sure
they fit well.
❼ Insert the cone end of stroke in the
bottom cartridge. ❾ Remove the snap ring from
its seat.
❿ Tighten the upper
part of protecting hose
clamp (see figure),
exercising the decisive
blows on the leg.
Remove oil seal and
bushing from the outer
tube itself.
⓫ Remove the tube all the
above parties (A-B-C-D-E).
Replace the “A” with a new
one.
⓬ Grease the base in
the bushing and seal the
outer tube.
❽ Pry up the edge of the
scraper and remove it from
the seat of the leg.