ELECTRIC MOTION EMTL01-J, Руководство пользователя

Страница: 19 / 48

19
EM-TL01-J

OWNER’S MANUAL

2014
⓲ Insert the stem with the spring after the
stop mechanical cone in the inner tube. ⓳ Position the brake support in the vise.
Hold the tube all the way and with the help of the
fork spring screw pump pack life.
⓴ Screw with a tightening torque 23.5 to 25.5 Nm.
⓯ Insert the oil seal in the tube (with the spring
upward view) and close the hose clamp with the
shells “X” with the drain to the oil seal.
·With moderate shots of the leg, insert the oil
seal in the “D”.
N.B.: This does not need a lot of strength. Avoid
hitting the seal once it is in place.
⓰ Insert the snap ring in place.
⓱ Follow “Maintenance of dust seal” instructions step 4 to 6, to assembly the dust seal in the manual.
To finish the maintenance, follow “Oil changement of hydraulic fork (left)” above in the manual instructions, step ❻ to
❿, to fill oil, and reassembly the fork.