ELECTRIC MOTION EMTL01-J, Руководство пользователя

Страница: 8 / 48

8
EM-TL01-J

OWNER’S MANUAL

2014
4. FORKS EMSport
Tableau 2 : hydraulic setting
The calibration of the spring can be modified with Allen key 6 mm.
11 turns exist to adjust the calibration of the spring.
Factory setting: 6 turns.
FORKS OIL CHANGE
Oil change intervals recommended are the following:
After the 50 first hours Every 6 months
V
If the intervals of oil change are not respected, the specifications of the fork could be deteriorated. Moreover
the thickening of oil itself which can lead to oil leaks from the seal.
To change oil of the fork:
- Clean the fork;
- Protect the surface of the inner tubes and clamp it in vise, as you can see in the following picture.
V
Tighten the vise moderately in order not distorted the inner tube.
HARD MIDDLE SUPPLE
Number of
notches
0 – 11 11 – 22 22 - 33
Figure 5 : Setting of calibration of the spring
HARD MIDDLE SUPPLE
Number of
notches
0 – 4 4 – 7 7-11
Figure 6 : Réglage fourche
Hydraulic setting
Calibration of the
spring
The fork is composed of:
- Fork leg with spring;
- Fork leg with hydraulic system.
The hydraulic setting can be modified on the top of the
fork with a plate screwdriver.
33 notches exist to adjust hydraulic.
It is better to start to close the hydraulic screwing the
screw to the stop and to unscrew to the required position.
Factory setting: 16 notches.