Electia CTC-909B, Руководство пользователя

Страница: 9 / 49

5
incorrect prompt message will be
displayed 2 sec., and you are
requested to repeat Step 2 to enter
again.

The code cannot be duplicated. If the
code has been used, the screen will
display
code in use and require you
re-enter a new code.
2.1.1.1 Pin Code

All User Pin Codes are used to regularly
arm/disarm the system and are allowed to
access
the Programming mode
accompanied with the Master Code.

User PIN code #2~#6 are deactivated by
factory default.

User Pin Code:
Factory default: 1234

To set PIN code
Step 1 . Move the cursor to the Pin Code then
press OK selection.
* 1 )
   
2 ) . . . .
to
6 ) . . . .
Step 2 . Move the cursor to the desired User
Pin Code then press OK .
E n t e r N e w C o d e
. . . .
Step 3. You are then required to enter your
preferred 4-digit code and then press
OK.
Step 4. Repeat the new code again and then
press OK .
R e p e a t N e w C o d e
. . . .
Step 5. A latch report on/off option is required
to choose:
o L a t c h r p t O n
L a t c h r p t O f f v
<
<
N
N
O
O
T
T
E
E
>
>

The Latch rpt On/Off section display
for your programming only when the
Latch selection function is enabled
(See section 2.2.2 under Configuring
your system)

The latch reporting function can be set
respectively for each Pin code.

Latch Report ON = Whenever the
system is armed, home armed or
disarmed, the Panel will transmit SMS
Contact ID code / SMS message /
GPRS reporting (according to pre-
setting)
to notify the Central
Monitoring Station.

Latch Reprot OFF = Whenever the
system is armed, home armed or
disarmed, the Panel will NOT transmitt
reporting(s) to notify the Central
Monitoring Station.
Step 6. Choose whether you wish to enable or
disable the latch report option and
press
OK .
Step 7 . You are then requested to give a name
for this new PIN code.
U s e r N a m e
_
<
<
N
N
O
O
T
T
E
E
>
>

A max of 10 digits for user name.
Step 8. Press OK to confirm the new name. If
no name is wished, press OK directly.
* 1 ) M R . S M I T H
2 ) M R S . S M I T H
3 )
   
4 ) . . . .
< < N N O O T T E E > >

2) MRS. SMITH representing the User
#2 PIN code is set up and user name
specified.

3)

representing this User #3
code is programmed without user
name specified.

4)
●●●●
representing the User #4
code is not yet set up for activation.
Step 9. Proceed to set additional User PIN
Codes as instructed from Step 1 ~
Step 8. Setting the PIN code is
completed.