16
P u s h b u t
t o n o n
D e v i c e t o a d d
Step 2.
For learning and setting procedure,
please refer to SR-15
’s manual for
details.
Other Devices
Learning
Smoke
Detector/Remote
Keypad/Water Sensor
For Smoke Detector, Remote Keypad, Water
Sensor and Night Switch, no further option
needs to be specified, hence after it is detected,
a zone is assigned, and the zone name
entered, and then press
OK
to confirm its
learining.
Learning IP Camera (CTC-1816)
To learn CTC-1816/CTC-1816 Basic IP camera,
you have to use
Learn Siren
fucntion (in the
Program Siren
menu) to configure it.
Step 1
. Put CTC-1816/CTC-1816 Basic IP
camera into learn mode (Please refer
to its operation manual for details).
Step 2
. Move the cursor to the position
Learn
Siren
and press
OK
key. The screen
displays
“
Pls wait RF transmitting
”,
and a learning code is transmitted to
the IP camera.
o L e a r n S i r e n
S i r e n T a m p O f f
S i r e n T a m p O n
C o n f i r m O n
C o n f i r m O f f
E n t r y S n d O n
E n t r y S n d O f f
Step 3
. If the IP camera (CTC-1816/CTC-
1816 Basic ) emits two beeps, it
indicates that the learning process is
now completed.
<
<
N
N
O
O
T
T
E
E
>
>
Please note that you can not view
captured images of IP camera (CTC-
1816/CTC1816
BASIC)
in
the
configuration webpage of C-FENCCE
HOME. To view imaged captured,
please
access
the
configuration
webpage
of
CTC-1816/CTC-1816
Basic for details.
Device Display Nomenclature
The devices are displayed throughout the
menus and especially where there are zone
lists. The meanings of the display components
are shown in an example below:
The PIR detector is in zone 03, programmed
for burglar mode.
PIR Z03 B
Zone attribute
Zone number
Device type
2.1.6.2. Add IRCamera
To add a IR camera, choose
Add IRCamera
in
the
Device +/-
menu. Please note that to add
a camera, the SIM card should be inserted first
and working properly. Only 6 IR Cameras are
allowed to be learnt in.
Step 1.
Select
Add IRCamera
, then press
OK
,
a prompting message is displayed.
* L e a r n I R C a m *
p l s p u s h b u t t o n
Step 2.
Press the learn/test button on the
camera over 10 seconds.
Step 3.
If the learning code is received
successfully by the Control Panel, the
screen will show you the device type
.
D e t e c t e d : ( O k ? )
I R C a m e r a
Step 4.
Use
&
keys to move the cursor to
the desired zone number then press
OK
.
Step 5.
After a zone number for the IRCamera
Contact is assigned, you can further
specify a device attribute for different
guardian purposes.
D e l a y Z o n e
H o m e O m i t
H o m e a c c e s s
A w a y o n l y
E n t r y
A w a y e n t r y