33
MMS function have not finished delivering
captured images from CTC-852 to preset
destination), the LCD will display the
message as below. If you wish to cancel
the MMS function, press
OK
to confirm it.
C a n c e l M M S
r e p o r t o k ?
3.7. Alarm Off Mode
If the system is in either the Away Arm mode or
Home Arm mode (Alarm ON), enter your pin
Code and press
OK
. If the PIN code is correct,
the Control Panel will sound 2 short beeps and
return to Disarmed mode. the display will show
both screens at every second flash.
A l a r m O f f
0 0 : 0 1 0 1 J a n
<
<
N
N
O
O
T
T
E
E
>
>
When the system is Home Armed,
pressing the
DISARM
button on the
Remote Controller will disarm the
system.
When the system is Away Armed,
pressing the
DISARM
button on the
Remote Controller can disarm the
sytem when either an
Entry
device
has been triggered, or when the
Remote Controller Entry Enable
has
been set to
ON
.
3.8. Event Log
There are total
255
of events can be
memorised & saved in the Control Panel,
including:
All Alarm Events with Device ID
All Arming, Force Arming, Partial
Arming,
By-Pass
Arming
and
Disarming Events.
The logged events are displayed in
reversed order (i.e. most recent event first).
The log is marked with a
Start
label before
the most recent entry and
End
after the
oldest entry.
To View the Event Log:
Step 1.
When the system is under User Menu,
move the cursor to Log position and
then press
OK
.
Step 2.
The log can now be scrolled up and
down and viewed with the
&
keys; the most recent event will be at
the start.
S T A R T
P a n e l
G S M S i g n a l
0 0 : 0 2 J a n 0 1
：
0 0 : 0 0 J a n 0
^
E N D
Also, arming method is also recorded &
viewed from the Log.
<
<
E
E
X
X
A
A
M
M
P
P
L
L
E
E
>
>
If the display shows:
U s e r 1
H o m e F
This means, the system is Force to do
Home Arm by User #1 PIN code.
3.9. Interaction Between C-
FENCCE HOME and CTC-852
After IR Camera (CTC-852) is learnt in, the IR
Camera will capture images within an assigned
area when an alarm is triggered and respond
according to preset attributes.
Step 1.
When the system gets into Arm mode,
the IR Camera will start detection after
30-second warming up period.
Step2A.
If the IR Camera(CTC-852) is
triggered, the IR Camera starts taking
photos. Then, the captured images
will be transmitted into the Control
Panel or the data will be transmitted to
the Control Panel.
Step2B.
After the IR Camera completes
transmitting captured pictures, then it
will change into the sleep mode and
wait for the C-FENCCE HOME to
