Basic information
Legal guidelines
Warranty conditions
Receiving inspection
General information
•
The calculations, sizing, installa-
installations and putting into servi-
ce related to the products descri-
bed in this document may only be
carried out by qualified specialists
•
Comply with the requirements of
local law, which may differ from the
information contained herein
•
Subject to change.
These instructions are for aproper installa-
tion, adjustment and maintenance of the
machine. It is therefore necessary to read
carefully the instructions given below and
to install, test and maintain the heat pump
by technicians qualified by specific training.
At the end of the warranty period, the ma-
nufacturer assumes no responsibility for
mechanical, hydraulic or electrical chan-
ges.
In the case of operations not expressly
authorized, executed in violation of these
instructions, the warranty will become void
with immediate effect.
During the installation must meet the speci-
fic safety statements. Check that your
mains supply correspond to the data of the
heat pump (nameplate).
These instructions and the wiring diagram
of the heat pump should be stored with due
care and, if necessary, be made available
to the personnel responsible .
The manufacturer declines any responsibi-
lity for damage to persons or property cau-
sed directly or indirectly from failure to fol-
low these instructions.
The housing may only be opened by a qua-
lified technicians.
L
imitations and Guidelines
The construction and the manufacture of
heat pump meets all the requirements of
European standards. (See EC Declaration
of Conformity).
The electrical connection of the heat pump
must be performed in compliance with the
applicable ASE, EN and IEC. Should also
observe the connection conditions of the
local energy supply
Warranty Conditions
Our performance guarantee shall lapse
for damage due to:
•
misuse or non standard use
•
installation or commissioning
incorrect by the purchaser or
from other.
•
Use of the system with pressure
excessive or outside the factory
values
•
Failure to follow directions in the
instructions for use
The warranty for heat pumps for
heating is 24 months from the date
of delivery.For the rest, the condi-
tions of sale, delivery and warranty
in accordance with the order confir-
mation.
Control Input
The units are delivered on a wooden
pallet with an adequate protective
packaging.
Upon delivery, check the unit for
shipping damage and that the bu-
dget is complete.
If damage is found, they must be
reported immediately to the transport
d o c u m e n t wi t h a wa r n i n g :
"Acceptance qualified as a result of
blatant corruption."
Given that overloading can cause
serious damage to heat pump and
plant heat source side, it is forbidden
to operate the heat pump if the follo-
wing conditions exist:
•
drying of the construction.
•
plant is not completed
(building shell).
•
windows and exterior doors
are not finished and closed.
In these cases it is necessary to pro-
vide a heating pipeline. A functional
heating or heat pump ready pose in
according to the DIN EN 1264 should
be only taking into account the above
conditions. Furthermore, keep in
mind that after the sizing of the heat
pump for normal operation may not
be possible to generate all the ne-
c e s s a r y t h e r m a l p o w e r .
Observe the following guidelines:
•
Comply with the regulations
and requirements of the ma-
nufacturer of mortars for scre-
ed coat!
•
Correct operation is only pos-
sible with a system installed in
a workmanlike manner (the
hydraulic, electrical, settings)!
Otherwise, the screed coat
may be damaged!
Low energy consumption use of
the heating with heat pump
The decision to opt for a heating
system with heat pump is a valuable
contribution to protecting the environ-
ment by reducing emissions and
reduced use of primary energy. In
order for the new heating system will
work efficiently, note the following
points:
L
The heating system with heat pump
must be sized and installed with ca-
re.
L
The lower is the flow temperature of
the heating water side, the more
efficient is the operation of the heat
pump.
L
Give preference to a short-term in-
tensive aeration of the premises.
Compared to the windows always
open in the tilted position, this imme-
diate ventilation reduces the con-
sumption of energy.
4