19
Indoor Installation
Corner Setup
AEROTOP T07...35 Corner Setup
If the heating or utility room has two
exterior walls, a space-saving corner
installation is ideal with the heat pump
being placed into the left or right corner.
Air ducts are not needed.
Required
Accessories:
-
WAI wall setup, suction side
-
WAO wall setup, output side
Left corner setup
Right corner setup
1) The compliance with acoustic limit
values must be clarified by
customer.
2) Necessary outside insulation by
customer, minimal clearance of
light well must not be gone below.
3) Possible air short-circuit to be
prevented by customer.
4) Statistics to be checked by
Customer
5) Distance from wall: min 20 mm,
max 40 mm
finished floors.
•
Statistics to be checked by
customer If necessary wall must be
reinforced with PUR- insulation
elements. This must be considered
for the cutouts
The indicated cutouts apply only to the
accessories AIR IN and OUTLET wall
setup. The dimensions apply after all
tasks have been completed and refer to
AEROTOP T
Width
Widt
h
Heigh
Dimensions Of Both Cutouts,
Without Insulation
Recommended Dimensions,
Light Well
a b c a2
c2
d2
e2
x
a3
c3
a4
c4
T07C, T07
995
1525
650
950
600 640
860
60
1200
600
800
600
T10C, T10
1095
1575
750
1050 700 640
910
60
1200
600
1000
600
T12C, T12, T14, T16
1195
1675
750
1150 700 640
1010
60
1200
600
1000
600
T20, T26
1195
1695
880
1150 830 740
930
60
1400
800
1200
800
T32, T35
1295
1905
1000
1250 950 740
1140
60
1400
800
1200
800
•
Possible air short-circuit to be
prevented by customer
•
Necessary outside insulation to be
installed by customer