EKOM DK-50 2x2V/110, Инструкция по использованию, Руководство по обслуживанию

Страница: 42 / 108

INSTRUCTIONS FOR USE
NP-DK50 2V-5_04-2011_A - 40 - 11/2010
B
C
10. FIRST OPERATION
(Fig.13)

Make sure that all stabilizers used during transport were removed.

Check that all pressurized air line connections are secure.

Connect to the mains.

Start compressor at pressure switch (2) by turning switch (3) to position “I.“

For kompressor in the box turn the switch (29) (Fig.6, Fig.7) at the front part of the soundproof box to the
position “I“ – green light indicates that the appliance is on.
Compressor - At first operation the air tank is pressurized until it reaches a preset level when the
compressor automatically switches off. As the air is used, the compressor works in automatic mode,
switched on or off by the pressure switch.
Compressor with dryer - In addition, adsorption dryer takes out humidity from the previous compressed air
during operation in the device and it blows out the entrapped condensate via condensate outlet on the dryer,
which is audible as a short hiss when compressor stops, or during the operation while switching the dryer
chambers (for M2).
Compressor with condensation and filtration unit - Model KJF filters and dehumidifies the air and
automatically releases condensed liquid through the filter´s discharge valve.
The compressor is not equipped with an emergency power supply.