EKOM DK-50 2x2V/110, Инструкция по использованию, Руководство по обслуживанию

Страница: 41 / 108

INSTRUCTIONS FOR USE
11/2010 - 39 - NP-DK50 2V-5_04-2011_A


9.2. Compressed air outlet
(Fig.11)
Lead the pressure hose from the output of
compressed air (1) to the appliance .
9.3. Electrical connection
Plug the electrical cord into the mains.
The appliance is equipped with a grounded plug. Make sure this connection complies with
local electrical codes. The mains voltage and frequency must comply with the data stated
on the appliance label.
(Fig.12)

Keep the socket easily accessible to ensure that in an emergency the
appliance can be safely disconnected from the mains.

The relevant current circuit must be protected in the electricity
distribution with circuit breaking element.

The connection of the earth ground pin

6mm (1) with other appliances
must be completed in accordance with local electrical codes. The
female socket (2), which is not included in the standard set, is an
optional accessory.
Electrical cable may not contact the hot parts of a compressor. Insulation could be
damaged!
If any electrical cord or air hose is damaged it must be replaced immediately.
9.4. Chance in the door opening

Disassemble the door, rectification screw (3
)
and the holder (2) of the hinge D (4).

Mount holder of the hinge D to the left side of the casing.

Rotate the door by 180º.

Insert a spacer (5) between the hinge H(1) and the bottom side of the door

Mount the door.

Disassemble the lock (6) on the door, rotate it by 180º.

Disassemble the latch (7) on the lock, rotate it by 180º.

Mount the lock to the door.
A
Fig.12
Fig.11
1
3
2