EKOM AD2250, Руководство пользователя

Страница: 37 / 92

PRODUCT MAINTENANCE
01/2020 -37- NP_AD500-2250-1_01_2020
Indication of an upcoming or expired service interval
See Chapter 20.
Setting new service interval
Press ESC + ► together and hold for 10 seconds to reset the service interval. Once complete, the
display returns back to the home screen.
The SET UP function for a new service interval is only functional if the dryer indicates an upcoming
service interval or a service interval has expired. Once complete, the MAINT counter increases
(number of completed service operations) by one. See the screen: Counters.
Information screens
– version ADXX00 S
Information screens are activated by simultaneously pressing and holding down the ESC key and
cursor buttons.

ESC+◄- “COLUMNS TIMING” screen
- Information about the defined valve cycling times
- INLET_A(INLET_B)
– duration of the adsorption
phase (half-cycle) for chamber A (chamber B)
- PURGE_A(PURGE_B)
– duration of the
regeneration (purge) phase for chamber A
(chamber B)

ESC+▼ – “COUNTERS” screen
- Information about counters
– service, solenoid
valves
- MAINT
– number of service operations performed
- VALVE
– number of solenoid valves activations
(the number displayed indicates the number of
times the inlet valve into chamber A - Inlet_A -
has been activated)
- Version
– software version

ESC+▲– “OPERATING TIME” screen
- information on operating hours: TOTAL, RUN,
STAND BY, time remaining to the next service
interval and value of the defined service interval
- TOTAL HRS
– total time the dryer has been
switched on
- RUN HRS
– total dryer operating (cycling) time
- STAND.HRS
– total time in STAND BY mode
- TIME-to-MT
– time until the next service interval
- SERV.INTER
– length of the defined service
interval